Showing all 13 resultsSorted by popularity

Electronics Module (7)

IoT (11)

Quadcopter (2)

Basic Components (8)

Development Boards (30)

Battery & Charger (17)

Micro Controller (26)

Motor (13)

Sensors (30)

Cables/Wires/Connectors (6)
Channels: 4
Trigger Voltage: 5V DC
Switching Voltage: 250V AC / 30V DC @ 10A
Microcontroller Compatibility: Arduino, Raspberry Pi, PIC, AVR, ARM, etc.
High/Low-Level Trigger Modes
Availability: Order now from Circuit City BD!
- Operating Voltage: 1.5V - 15V DC
- Tone Generation Range: 1.5 kHz - 2.5 kHz
- Current Consumption: Less than 25mA
- Application: Alarms, Timers, Notifications, Sound Alerts
- Availability: Available at Circuit City BD
- Product Name: FC-04 Microphone Sound Sensor Module
- Main Chip: LM393, Electret Condenser Microphone
- Operating Voltage: 3.3V - 5V
- Induction Distance: 0.5 Meter
- Output Signal: Single Channel, Low-Level Output
- Size: 43mm x 17mm x 8mm
- Weight: 3g
- Applications: Sound detection, voice-activated systems, security alarms
- Availability: Available at Circuit City BD
- Product Name: HC-SR501 PIR Infrared Motion Sensor
- Operating Voltage: 4.5V-20V DC
- Detection Distance: 3 to 7m (Adjustable)
- Detection Angle: <140°
- Current Consumption: <60uA
- Availability: Available at Circuit City BD
Dual-Channel 5V Relay Module
Low-Level Trigger Relay
Trigger Voltage: 3.3V – 5V
Switching Capacity: 250V AC @ 10A, 30V DC @ 10A
Opto-Isolated for High Reliability
Built-in Back EMF Protection
Two LED Indicators for Relay Status
Availability: Order now from Circuit City BD
IR Remote Control & Sensor Module
Operating Voltage: 2.7V - 5.5V
Transmission Distance: Up to 8m
NEC Encoding Format
Internal PCM Filter & EMI Shielding
Battery (CR2025) Not Included
Availability: Order now from Circuit City BD!
Relay Type: 1-Channel 5V Relay
Operating Voltage: 3V - 5V DC
Switching Capacity: AC 250V/10A, DC 30V/10A
Trigger Method: High-Level & Low-Level Selectable
Microcontroller Compatibility: Arduino, AVR, PIC, ARM, DSP
Availability: Order now from Circuit City BD!
Interface: I2C (PCF8574 Chip)
Compatible LCDs: 16×2 & 20×4 Character Displays
Power Supply: 5V DC
Adjustable Contrast & Backlight Control
Up to 8 Modules on a Single I2C Bus
Availability: Order now from Circuit City BD!
- Product Name: ESP8266 (ESP-01) Serial WiFi Wireless Transceiver Module
- Wi-Fi Standard: 802.11 b/g/n
- Flash Memory: 1MB
- Processor: 32-bit CPU with TCP/IP stack
- Power Efficiency: Standby power <1.0mW (DTIM3)
- Interfaces: UART, SPI, SDIO 1.1/2.0
- Applications: IoT, home automation, wireless sensor networks
- Availability: Available at Circuit City BD
- Product Name: KY-037 Microphone Sound Sensor Detection Module
- Main Chip: LM393, Electret Condenser Microphone
- Operating Voltage: 3.3V - 5V
- Induction Distance: 0.5 Meter
- Output Signal: Single Channel, Low-Level Output
- Size: 43mm x 17mm x 8mm
- Weight: 3g
- Applications: Sound detection, voice-activated systems, security alarms
- Availability: Available at Circuit City BD
- Product Name: Digital Load Cell Weight Sensor 5kg
- Dimensions: 75 x 13 x 13 mm
- Weighing Range: 0-5 kg
- Material: Aluminum alloy
- Output: 1.0 ± 0.1mV/V
- Compatibility: HX711 & Arduino compatible
- Flex Length: 5.6 cm
- Total Length: 7 cm (2.2")
- Height: 0.43 mm (0.017")
- Resistance Variation: 30K-70KΩ ±30%
- Measuring Range: 25KΩ - 60KΩ
- Measurement Accuracy: ±0.039%
- Life Cycle: >1 million bends
- Power Rating: 0.5W
- Product Name: ADXL345 3-Axis Accelerometer Sensor Module
- Voltage: 3-5V (5V Recommended)
- Measuring Range: ±2G, ±4G, ±8G, ±16G
- Output Type: Digital
- Communication Interface: SPI (3- and 4-wire) and I2C
- Availability: Available at Circuit City BD