Subtotal: 479.00৳
“HX1838 NEC Coding IR Remote Control Sensor Module” has been added to your cart. View cart
Showing 1–24 of 109 resultsSorted by popularity

Electronics Module (6)

IoT (11)

Quadcopter (2)

Basic Components (8)

Development Boards (30)

Battery & Charger (17)

Micro Controller (26)

Motor (13)

Sensors (30)

Cables/Wires/Connectors (6)
- Connector Type: Female to Female
- Length: 20cm (8 inches)
- Material: Copper Plated
- Pin Spacing: 2.54mm (Standard)
- Durable, Flexible & Reusable
- Perfect for Breadboards, Sensors & Microcontrollers
- Available at: Circuit City BD
- Connector Type: Male to Female
- Length: 20cm (8 inches)
- Material: Copper Plated
- Pin Spacing: 2.54mm (Standard)
- Durable, Flexible & Reusable
- Ideal for Breadboard & PCB Projects
- Available at: Circuit City BD
- Connector Type: Male to Male
- Length: 20cm (8 inches)
- Material: Copper Plated
- Pin Spacing: 2.54mm (Standard)
- Flexible, Durable & Reusable
- Perfect for Breadboard & PCB Projects
- Available at: Circuit City BD
- Nominal Voltage: 9V
- Built Quality: Leakproof Metal Jacket
- Environment-Friendly: 0% Mercury and Cadmium
- Connector Type: Corrosion-Free Press Stud Terminal
- Application: DIY Projects, Electronics, Household Devices
- Availability: Available at Circuit City BD
Diode Type: PN Junction Rectifier
Voltage Ratings: 1000V Peak Reverse Voltage, 700V RMS
Current Rating: 1A Average Forward Current
Purpose: AC to DC Rectification
Compatibility: Works with 1N400X Series
Available at: Circuit City BD
Transistor Type: NPN
Voltage Ratings: Vce = 45V, Vcb = 50V, Veb = 6V
Current Rating: 100mA Collector Current
Gain (hFE): 110
Applications: Switching & Amplification
Available at: Circuit City BD
Operating Voltage: 3V – 6V DC
RPM: 2000
Shaft Diameter: 2mm
Shaft Length: 10mm
Weight: 15g
Availability: Order now from Circuit City BD!
- ESP-32 NodeMCU 30Pin
- Dual-core WiFi + Bluetooth microcontroller
- Supports UART, GPIO, ADC, DAC, PWM, I2C, and I2S interfaces
- Built-in 32Mbit flash memory for enhanced performance
- Available now at Circuit City BD
Channels: 4
Trigger Voltage: 5V DC
Switching Voltage: 250V AC / 30V DC @ 10A
Microcontroller Compatibility: Arduino, Raspberry Pi, PIC, AVR, ARM, etc.
High/Low-Level Trigger Modes
Availability: Order now from Circuit City BD!
LED Size: 5mm
Color: Red
Lens Appearance: Transparent
Forward Voltage: 3.5V
Forward Current: 30mA
Mounting Type: Through-Hole
Availability: Order now from Circuit City BD!
Brand: Generic
Tie Points: 400 (300 in main strip, 100 in power lanes)
Ideal for: Arduino, Raspberry Pi, and electronics prototyping
Build: Plastic housing, metal contact clips
Power Rating: 3–5A, 300V Max
Size: 82mm x 55mm x 10mm
Available at: Circuit City BD
- Material: Hard Leather, High-Quality Build
- Wire Length: 5cm, Open-Wire End for Easy Connection
- Polarity Protection: Prevents Reverse Connection & Short Circuit
- Application: Ideal for Arduino, DIY Projects, and Battery-Powered Circuits
- Availability: Available at Circuit City BD
Resistance: 1K Ohm (1000Ω)
Power Rating: 1/4 Watt (0.25W)
Tolerance: ±1%
Voltage Rating: 250V Working, 500V Overload
Type: Fixed Resistor, Through-Hole Mounting
Availability: Order now from Circuit City BD!
- Operating Voltage: 1.5V - 15V DC
- Tone Generation Range: 1.5 kHz - 2.5 kHz
- Current Consumption: Less than 25mA
- Application: Alarms, Timers, Notifications, Sound Alerts
- Availability: Available at Circuit City BD
- Operating Voltage: 3.3V - 5V DC
- Output: Analog (A0) & Digital (D0) Outputs
- Adjustable Sensitivity: Potentiometer for light intensity control
- Application: Light detection, brightness control, smart lighting
- Availability: Available at Circuit City BD
- Product Name: FC-04 Microphone Sound Sensor Module
- Main Chip: LM393, Electret Condenser Microphone
- Operating Voltage: 3.3V - 5V
- Induction Distance: 0.5 Meter
- Output Signal: Single Channel, Low-Level Output
- Size: 43mm x 17mm x 8mm
- Weight: 3g
- Applications: Sound detection, voice-activated systems, security alarms
- Availability: Available at Circuit City BD
- Product Name: HC-SR04 Ultrasonic Distance Sonar Sensor
- Operating Voltage: 5V
- Measuring Range: 2cm to 400cm
- Accuracy: ±3mm
- Applications: Distance measurement, obstacle detection, automation projects
- Availability: Available at Circuit City BD
- Product Name: Servo Motor Micro SG90 180 Degree Rotation
- Operating Voltage: 3.0V - 7.2V
- Stall Torque: 1.2Kg-cm @ 4.8V, 1.6Kg-cm @ 6.6V
- Rotation Angle: 180°
- Weight: 9g
- Cable Length: 25cm
- Availability: Available at Circuit City BD
- Product Name: HC-SR501 PIR Infrared Motion Sensor
- Operating Voltage: 4.5V-20V DC
- Detection Distance: 3 to 7m (Adjustable)
- Detection Angle: <140°
- Current Consumption: <60uA
- Availability: Available at Circuit City BD
Dual-Channel 5V Relay Module
Low-Level Trigger Relay
Trigger Voltage: 3.3V – 5V
Switching Capacity: 250V AC @ 10A, 30V DC @ 10A
Opto-Isolated for High Reliability
Built-in Back EMF Protection
Two LED Indicators for Relay Status
Availability: Order now from Circuit City BD
IR Remote Control & Sensor Module
Operating Voltage: 2.7V - 5.5V
Transmission Distance: Up to 8m
NEC Encoding Format
Internal PCM Filter & EMI Shielding
Battery (CR2025) Not Included
Availability: Order now from Circuit City BD!
Supply Voltage: 3.0V - 5.0V DC
Receiver Frequency: 38 KHz
Low Power Consumption & High Immunity
Internal Filter for PCM Frequency
TTL & CMOS Compatibility
Availability: Order now from Circuit City BD!
Operating Voltage: 2.5V - 4V DC
Current Consumption: 130 - 220mA
Flow Rate: 80 - 120 L/H
Maximum Lift: 40 - 110 mm
Ideal for DIY Projects & Hobby Kits
Availability: Order now from Circuit City BD!
Relay Type: 1-Channel 5V Relay
Operating Voltage: 3V - 5V DC
Switching Capacity: AC 250V/10A, DC 30V/10A
Trigger Method: High-Level & Low-Level Selectable
Microcontroller Compatibility: Arduino, AVR, PIC, ARM, DSP
Availability: Order now from Circuit City BD!