Showing 1–24 of 31 resultsSorted by popularity

Electronics Module (4)

IoT (11)

Quadcopter (2)

Basic Components (8)

Development Boards (30)

Battery & Charger (17)

Micro Controller (26)

Motor (13)

Sensors (31)

Cables/Wires/Connectors (6)
- Nominal Voltage: 9V
- Built Quality: Leakproof Metal Jacket
- Environment-Friendly: 0% Mercury and Cadmium
- Connector Type: Corrosion-Free Press Stud Terminal
- Application: DIY Projects, Electronics, Household Devices
- Availability: Available at Circuit City BD
Diode Type: PN Junction Rectifier
Voltage Ratings: 1000V Peak Reverse Voltage, 700V RMS
Current Rating: 1A Average Forward Current
Purpose: AC to DC Rectification
Compatibility: Works with 1N400X Series
Available at: Circuit City BD
Transistor Type: NPN
Voltage Ratings: Vce = 45V, Vcb = 50V, Veb = 6V
Current Rating: 100mA Collector Current
Gain (hFE): 110
Applications: Switching & Amplification
Available at: Circuit City BD
Channels: 4
Trigger Voltage: 5V DC
Switching Voltage: 250V AC / 30V DC @ 10A
Microcontroller Compatibility: Arduino, Raspberry Pi, PIC, AVR, ARM, etc.
High/Low-Level Trigger Modes
Availability: Order now from Circuit City BD!
LED Size: 5mm
Color: Red
Lens Appearance: Transparent
Forward Voltage: 3.5V
Forward Current: 30mA
Mounting Type: Through-Hole
Availability: Order now from Circuit City BD!
Brand: Generic
Tie Points: 400 (300 in main strip, 100 in power lanes)
Ideal for: Arduino, Raspberry Pi, and electronics prototyping
Build: Plastic housing, metal contact clips
Power Rating: 3–5A, 300V Max
Size: 82mm x 55mm x 10mm
Available at: Circuit City BD
- Material: Hard Leather, High-Quality Build
- Wire Length: 5cm, Open-Wire End for Easy Connection
- Polarity Protection: Prevents Reverse Connection & Short Circuit
- Application: Ideal for Arduino, DIY Projects, and Battery-Powered Circuits
- Availability: Available at Circuit City BD
Resistance: 1K Ohm (1000Ω)
Power Rating: 1/4 Watt (0.25W)
Tolerance: ±1%
Voltage Rating: 250V Working, 500V Overload
Type: Fixed Resistor, Through-Hole Mounting
Availability: Order now from Circuit City BD!
- Operating Voltage: 1.5V - 15V DC
- Tone Generation Range: 1.5 kHz - 2.5 kHz
- Current Consumption: Less than 25mA
- Application: Alarms, Timers, Notifications, Sound Alerts
- Availability: Available at Circuit City BD
- Product Name: FC-04 Microphone Sound Sensor Module
- Main Chip: LM393, Electret Condenser Microphone
- Operating Voltage: 3.3V - 5V
- Induction Distance: 0.5 Meter
- Output Signal: Single Channel, Low-Level Output
- Size: 43mm x 17mm x 8mm
- Weight: 3g
- Applications: Sound detection, voice-activated systems, security alarms
- Availability: Available at Circuit City BD
IR Remote Control & Sensor Module
Operating Voltage: 2.7V - 5.5V
Transmission Distance: Up to 8m
NEC Encoding Format
Internal PCM Filter & EMI Shielding
Battery (CR2025) Not Included
Availability: Order now from Circuit City BD!
Operating Voltage: 2.5V - 4V DC
Current Consumption: 130 - 220mA
Flow Rate: 80 - 120 L/H
Maximum Lift: 40 - 110 mm
Ideal for DIY Projects & Hobby Kits
Availability: Order now from Circuit City BD!
Relay Type: 1-Channel 5V Relay
Operating Voltage: 3V - 5V DC
Switching Capacity: AC 250V/10A, DC 30V/10A
Trigger Method: High-Level & Low-Level Selectable
Microcontroller Compatibility: Arduino, AVR, PIC, ARM, DSP
Availability: Order now from Circuit City BD!
Display Type: 16x2 Character LCD
Backlight Options: Blue or Yellow
Character Color: White on Blue/Yellow Background
Power Supply: 5V DC
Compatible with Arduino & Microcontrollers
Availability: Order now from Circuit City BD!
Interface: I2C (PCF8574 Chip)
Compatible LCDs: 16×2 & 20×4 Character Displays
Power Supply: 5V DC
Adjustable Contrast & Backlight Control
Up to 8 Modules on a Single I2C Bus
Availability: Order now from Circuit City BD!
- Brand: iMAX
- Power: 80W max output
- Battery Compatibility: Li-ion, LiPo, LiFe, NiCd, NiMH, Pb
- Input Voltage: 11–18V DC (Power Adapter Required, Not Included)
- Features: Microprocessor Controlled, Individual Cell Balancing.
- Ideal for: RC Hobbyists, Drone Pilots, Robotics, DIY Electronics
- Available at: Circuit City BD
- Brand: iMAX B6-AC
- Power: 80W Discharge, 10W Charge
- Battery Compatibility: Li-ion, LiPo, LiFe, NiMH, NiCd, Pb
- Input Voltage: 100~240V AC / 11~18V DC
- Available at: Circuit City BD
- Brand: Wild Scorpion
- Capacity: 2200mAh
- Voltage: 11.1V (3S)
- Discharge Rate: 30C for High-Performance Output
- Max Charging Rate: 5C for Fast Charging
- Connector Type: XT for Charging, JST for Discharge
- Size: 105 x 35 x 24mm
- Weight: ~183g
- Ideal for: RC Drones, FPV Systems, UAVs, RC Cars, and High-Power Applications
- Available at: Circuit City BD
- Brand: Wild Scorpion
- Capacity: 1500mAh
- Voltage: 11.1V (3S)
- Discharge Rate: 25C for High-Performance Output
- Max Charging Rate: 5C Fast Charging Support
- Connector Type: XT for Charging, JST for Discharge
- Size: 68 x 35 x 23.5mm
- Weight: ~112g
- Ideal for: RC Drones, FPV Systems, UAVs, and High-Performance Models
- Available at: Circuit City BD
- Brand: Wild Scorpion
- Capacity: 1100mAh
- Voltage: 11.1V (3S)
- Discharge Rate: 25C for High-Performance Output
- Max Charging Rate: 5C Fast Charging Support
- Connector Type: XT for Charging, JST for Discharge
- Size: 58.5 x 29.3 x 20mm
- Weight: ~94g
- Ideal for: RC Drones, FPV Systems, UAVs, and High-Performance Models
- Available at: Circuit City BD
- Brand: LiPower
- Capacity: 3200mAh
- Voltage: 11.1V (3S)
- Discharge Rate: High-Performance Output
- Max Charging Rate: Fast Charging Support
- Connector Type: XT-60 for Charging, JST for Discharge
- Size: 138 x 42 x 21mm
- Weight: ~255g
- Ideal for: RC Cars, Drones, UAVs, FPV Systems, and Power Tools
- Available at: Circuit City BD
- Brand: LiPower
- Capacity: 2200mAh
- Voltage: 11.1V (3S)
- Discharge Rate: 35C
- Max Charging Rate: 5C
- Connector Type: XT-60 for Charging, JST for Discharge
- Size: 118 x 34 x 28mm
- Weight: ~185g
- Ideal for: RC Cars, Drones, UAVs, FPV Systems, and Power Tools
- Available at: Circuit City BD
- Brand: LiPower
- Capacity: 1550mAh
- Voltage: 11.1V (3S)
- Discharge Rate: 35C
- Max Charging Rate: 5C
- Connector Type: XT for Charging, JST for Discharge
- Size: 75 x 35 x 24mm
- Weight: ~120g
- Perfect for: RC Cars, Drones, UAVs, FPV Systems, and Power Tools
- Available at: Circuit City BD
- Input Interface: Type-C
- Charging Mode: Linear charging
- Current Protection: Yes
- Charge Current: 1A (Adjustable)
- Charge Precision: 1.5%
- Input Voltage: 4.5V-5.5V
- Full Charge Voltage: 4.2V
- Available at: Circuit City BD