Showing all 19 resultsSorted by popularity

IoT (11)

Quadcopter (2)

Basic Components (6)

Development Boards (30)

Battery & Charger (17)

Components (1)

Micro Controller (26)

Motor (13)

Sensors (29)

Cables/Wires/Connectors (6)
Diode Type: PN Junction Rectifier
Voltage Ratings: 1000V Peak Reverse Voltage, 700V RMS
Current Rating: 1A Average Forward Current
Purpose: AC to DC Rectification
Compatibility: Works with 1N400X Series
Available at: Circuit City BD
Transistor Type: NPN
Voltage Ratings: Vce = 45V, Vcb = 50V, Veb = 6V
Current Rating: 100mA Collector Current
Gain (hFE): 110
Applications: Switching & Amplification
Available at: Circuit City BD
- ESP-32 NodeMCU 30Pin
- Dual-core WiFi + Bluetooth microcontroller
- Supports UART, GPIO, ADC, DAC, PWM, I2C, and I2S interfaces
- Built-in 32Mbit flash memory for enhanced performance
- Available now at Circuit City BD
LED Size: 5mm
Color: Red
Lens Appearance: Transparent
Forward Voltage: 3.5V
Forward Current: 30mA
Mounting Type: Through-Hole
Availability: Order now from Circuit City BD!
Resistance: 1K Ohm (1000Ω)
Power Rating: 1/4 Watt (0.25W)
Tolerance: ±1%
Voltage Rating: 250V Working, 500V Overload
Type: Fixed Resistor, Through-Hole Mounting
Availability: Order now from Circuit City BD!
Brand: Generic
Tie Points: 400 (300 in main strip, 100 in power lanes)
Ideal for: Arduino, Raspberry Pi, and electronics prototyping
Build: Plastic housing, metal contact clips
Power Rating: 3–5A, 300V Max
Size: 82mm x 55mm x 10mm
Available at: Circuit City BD
- Operating Voltage: 1.5V - 15V DC
- Tone Generation Range: 1.5 kHz - 2.5 kHz
- Current Consumption: Less than 25mA
- Application: Alarms, Timers, Notifications, Sound Alerts
- Availability: Available at Circuit City BD
- Product Name: ESP8266 (ESP-01) Serial WiFi Wireless Transceiver Module
- Wi-Fi Standard: 802.11 b/g/n
- Flash Memory: 1MB
- Processor: 32-bit CPU with TCP/IP stack
- Power Efficiency: Standby power <1.0mW (DTIM3)
- Interfaces: UART, SPI, SDIO 1.1/2.0
- Applications: IoT, home automation, wireless sensor networks
- Availability: Available at Circuit City BD
- Product Name: 7x20mm Coreless Motor with 55mm Propeller Pair
- Rated Voltage: 3.7V
- Current: 0.1A
- Max Speed: 50000 RPM
- Shaft Diameter: 1.0 mm
- Propeller Length: 55mm
- Availability: Available at Circuit City BD
- Product Name: RS2205 2300KV Racing BLDC Motor CW/CCW
- KV Rating: 2300KV
- Power Supply: 3-4S LiPO
- Max Thrust: 1024g
- Shaft Diameter: M5
- Propeller Compatibility: HQ 5045 BN
- Availability: Available at Circuit City BD
- Product Name: Emax XA2212-980kv Outrunner Brushless Motor
- KV Rating: 980KV
- Power Supply: 2-3S LiPO
- Max Thrust: 880g
- Shaft Diameter: 3mm
- Propeller Compatibility: 9-10 inch
- Availability: Available at Circuit City BD
- A2212 1400KV Brushless Outrunner Motor
- High-Speed & Efficient Performance
- Lightweight & Durable Metal Case
- Ideal for Drones, Quadcopters, and RC Applications
- Available at Circuit City BD
- Product Name: ESP-8266 NodeMCU OLED Module
- Display: Integrated 0.96″ OLED
- Power Supply: 5V via Micro USB
- Compatibility: Arduino & NodeMCU (Lua for ESP8266)
- Connection: Micro USB
- Availability: Available at Circuit City BD
- Product Name: ESP-8266 (CH340) NodeMCU Lua V3
- Wi-Fi Module: Built-in ESP8266
- Power Supply: 4.5V ~ 9V (USB-powered)
- Communication: UART/GPIO interface
- Flash Size: 4MB
- Availability: Available at Circuit City BD
- Product Name: ESP-8266 NodeMCU Lua V3
- Wi-Fi Module: Built-in ESP-12E
- Power Supply: 5V (via micro USB)
- Communication: GPIO, PWM, I2C, ADC, UART, SPI
- Flash Size: 4MB
- Availability: Available at Circuit City BD
- Product Name: ESP-32 Camera Module OV2640
- Wi-Fi Module: ESP32-S with 802.11 b/g/n and Bluetooth 4.2 LE
- Camera Module: OV2640 (2MP)
- Storage: Micro SD card slot (Supports up to 4GB)
- Interfaces: UART, SPI, I2C, PWM, ADC, DAC
- Availability: Available at Circuit City BD
- Product Name: ESP-32 NodeMCU 30Pin Type-C
- Wi-Fi Module: ESP-WROOM-32s with IEEE 802.11 b/g/n
- Built-in Flash: 32Mbit
- Interfaces: UART, GPIO, ADC, DAC, SDIO, PWM, I2C, I2S
- Logic Level: 3.3V
- Power Supply: 5V
- Availability: Available at Circuit City BD
- ESP-32 (CH340C Version) NodeMCU 38 Pin
- Built-in WiFi + Bluetooth connectivity
- USB CH340 chipset for easy programming
- Supports multiple peripheral interfaces
- Available now at Circuit City BD
- 2.4GHz Dual-Mode WiFi + Bluetooth Development Board
- Ultra-Low power consumption with IDE compatibility
- High-performance microcontroller for IoT applications
- Available now at Circuit City BD