Subtotal: 220.00৳
“DC 5V Stepper Motor with ULN2003 Driver Board 28BYJ-48” has been added to your cart. View cart
Showing all 14 resultsSorted by popularity

IoT (11)

Quadcopter (2)

Development Boards (31)

Devlopment Kit (1)

Micro Controller (27)

Motor (12)

Sensors (20)
- Main Chip: QMC5883L (Compatible with HMC5883L)
- Operating Voltage: 3V - 5V DC
- Communication: I2C Protocol
- Measuring Range: ±1.3 - 8 Gauss
- PCB: High-quality immersion gold
- Build: Machine-welded for durability
- Supply Voltage: 2.0 - 3.6V .
- Interface Type: I²C, SPI for flexible communication.
- Sensing Range: ±2g, ±4g, ±8g, ±16g
- Sensitivity (X-axis): 28.6 LSB/g
- Sensitivity (Y-axis): 31.2 LSB/g
- Sensitivity (Z-axis): 34.5 LSB/g
- Chip: Built-in 16-bit ADC, MPU6050 driver chip.
- Data Output: 16-bit resolution.
- Voltage: Operates at 3-5V DC.
- Protocol: I2C/IIC communication.
- Gyroscope Range: ±250, ±500, ±1000, ±2000 °/s.
- Accelerometer Range: ±2g, ±4g, ±8g, ±16g.
- Microcontroller: ATmega32U4
- Operating Voltage: 5V
- Input Voltage (Recommended): 7-12V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
- SRAM: 2.5 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- Microcontroller: AT91SAM3X8E.
- Operating Voltage: 3.3V.
- Input Voltage (Recommended): 7-12V.
- Input Voltage (Limits): 6-16V.
- Digital I/O Pins: 54 (12 pins support PWM output).
- Analog Input Pins: 12.
- Analog Output Pins: 2 (DAC).
- Clock Speed: 84 MHz.
- SRAM: 96 KB (64 KB + 32 KB).
- Flash Memory: 512 KB.
- Microcontroller: ATmega32U4, 5V/16MHz.
- Interface: Micro USB programming.
- I/O Pins: 12 digital, 5 PWM.
- Analog: 4 ADC inputs, 10-bit.
- Memory: 32 KB Flash, 2.5 KB SRAM, 1 KB EEPROM.
- Clock: 16 MHz speed.
- Microcontroller: ATmega328
- CPU Speed: 16 MHz.
- Voltage: 5V operating.
- Pins: 14 digital (6 PWM), 6 analog.
- Interfaces: UART, I2C, SPI.
- Memory: 32 KB Flash, 2 KB SRAM, 1 KB EEPROM.
- Microcontroller: ATmega328 (SMD) with CH340G interface.
- Operating Voltage: Works at 5V.
- Input Voltage (Recommended): Accepts 7–12V as input.
- Input Voltage (Limit): Operates within 6–20V safely.
- Digital I/O Pins: Includes 14 pins, 6 of which support PWM output.
- Analog Input Pins: Features 6 analog input pins.
- Flash Memory: 32 KB (0.5 KB used by bootloader).
- Clock Speed: Runs at 16 MHz.
MEGA 2560 PRO Mini (EMBED) CH340G ATmega2560-16AU
- Compatibility: Supports Mega 2560 and ATmega2560-based projects.
- Power Supply: Powered via Micro USB connector.
- Voltage Output: 5V (800mA) and 3.3V (800mA).
- Ideal Use: Excellent for ATmega2560 development projects.
- USB Driver: CH340
- Operating Voltage: 5V
- Recommended Input Voltage: 7-12V
- Input Voltage Range: 6-20V
- Digital I/O Pins: 54 (15 with PWM output)
- Analog Input Pins: 16
- Microcontroller: ATmega2560.
- Operating Voltage: 6–12V.
- Digital I/O Pins: 54 (15 PWM).
- Analog Input Pins: 16.
- Flash Memory: 256 KB.
- Clock Speed: 16 MHz.
- Microcontroller: ATmega328P
- Flash Memory: 32KB
- RAM: 2KB
- Digital I/O Pins: 14 (6 PWM)
- Analog Input Pins: 8 (A0–A7)
- Operating Voltage: 5V
- USB Driver: FT232
- Power Supply: USB Mini, 7-12V DC
- USB Driver: CH340 for seamless USB communication.
- Microcontroller: ATmega328P (8-bit AVR family).
- Operating Voltage: 5V (logic level).
- Analog Input Pins: 8 (A0 ~ A7).
- Digital I/O Pins: 14 (including 6 PWM outputs).
- Flash Memory: 32KB (includes bootloader).
- Reset: Manual reset switch available.
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (6 with PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 20 mA
- DC Current for 3.3V Pin: 50 mA
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz